48 found, showing page 2 of 4
$75.99
*QUIKRETE EPOXY M/S TAN*****
*QUIKRETE EPOXY M/S TAN*****
View Details
$31.49
*QUIKRTE CONCRTE BASE2*****
*QUIKRTE CONCRTE BASE2*****
View Details
$44.99
QUIKRETE LTX MASON WTRPROFER
Heavy-duty resin technology provides maximum adhesion while protecting concrete and masonry surfaces with a watertight barrier guaranteed to stop water. Advanced formula is ideal for basements. Use on properly prepared interior and exterior masonry walls and foundations, basements, cinder block, brick, and poured concrete. Do not use on floors. If used outdoors, top coat with a high-quality exterior latex house paint. Mold and mildew resistant. Dries to the touch in 30 to 60 minutes. Clean up with warm soapy water.
View Details
$53.99
SL GRAY POLY FLOOR PAINT
A gloss enamel for use on interior and exterior surfaces of wood, metal, and masonry. Dries to a durable and abrasion- resistant finish that will withstand repeated scrubbings and high traffic. Ideal for use on floors, steps, walkways, and trim. Not recommended for garage floors. Covers up to 400 sq. ft. per gallon. Dries to touch in 2 hours and to recoat in 24 hours. Allow to dry for 3 days before allowing heavy traffic. May be applied by brush, roller, or spray equipment. Clean up equipment with mineral spirits or paint thinner. Not for sale in restricted areas of California.
View Details
$39.99
DARK GRAY LTX FLOOR ENAMEL
Perfect for interior and exterior hard use areas. The scuff-resistant finish is easy-to-maintain and stays looking new for years. Self-priming. Durable satin finish. Stain-resistant. Covers up to 400 sq. ft. per gallon. Dries to touch in 1hour and has the ease of water clean up. Product uses: Wood, concrete, floors, primed metal, steps, railings, and porches.
View Details
$32.99
WHITE MARINE TOP PAINT
A high-performance modified alkyd base coating for use above the waterline. Provides excellent gloss retention, UV resistance, flexibility and durability in extreme weather conditions. Coverage will vary with condition of surface and method of application. Quart size.
View Details
$32.99
S/G WHT MARINE TOP PAINT
A high-performance modified alkyd base coating for use above the waterline. Provides excellent gloss retention, UV resistance, flexibility and durability in extreme weather conditions. Coverage will vary with condition of surface and method of application. Quart size.
View Details
$32.99
BAT GRY MARINE TOP PAINT
A high-performance modified alkyd base coating for use above the waterline. Provides excellent gloss retention, UV resistance, flexibility and durability in extreme weather conditions. Coverage will vary with condition of surface and method of application. Quart size.
View Details
$32.99
NAVY BL MARINE TOP PAINT
A high-performance modified alkyd base coating for use above the waterline. Provides excellent gloss retention, UV resistance, flexibility and durability in extreme weather conditions. Coverage will vary with condition of surface and method of application. Quart size.
View Details
$32.99
BRT RED MARINE TOP PAINT
A high-performance modified alkyd base coating for use above the waterline. Provides excellent gloss retention, UV resistance, flexibility and durability in extreme weather conditions. Coverage will vary with condition of surface and method of application. Quart size.
View Details
$77.99
BLK MARINE BOTTOM PAINT
A protective copper-based coating for use below the waterline on the boat bottom. Hard antifouling coating slowly releases copper, preventing the build-up of barnacles, algae, and other marine growth. Use for mild to moderate fouling conditions in both fresh and saltwater. Formulated for use on both trailered boats and boats that remain in the water all season or all year long. Contains 45\% cuprous oxide (copper) which has the best category features (hard antifouling). Do Not use on aluminum surfaces as the copper in the coating will react unfavorably. Newly painted boats shoud be launched within 60 days of painting for best antifouling performance. Priming is not necessary on bare fiberglass or previously painted surfaces (lightly sanded and in good condition). To prime bare wood, apply thinned (10\% mineral spirits to 90\% antifouling paint) paint followed by a full-strength antifouling paint for subsequent coats. Bare metal needs to be primed with a 2-part industrial epoxy primer (contact Tech helpline 800/787-8258). Quart size.
View Details
$77.99
BLUE MARINE BOTTOM PAINT
A protective copper-based coating for use below the waterline on the boat bottom. Hard antifouling coating slowly releases copper, preventing the build-up of barnacles, algae, and other marine growth. Use for mild to moderate fouling conditions in both fresh and saltwater. Formulated for use on both trailered boats and boats that remain in the water all season or all year long. Contains 45\% cuprous oxide (copper) which has the best category features (hard antifouling). Do Not use on aluminum surfaces as the copper in the coating will react unfavorably. Newly painted boats shoud be launched within 60 days of painting for best antifouling performance. Priming is not necessary on bare fiberglass or previously painted surfaces (lightly sanded and in good condition). To prime bare wood, apply thinned (10\% mineral spirits to 90\% antifouling paint) paint followed by a full-strength antifouling paint for subsequent coats. Bare metal needs to be primed with a 2-part industrial epoxy primer (contact Tech helpline 800/787-8258). Quart size.
View Details
$54.99
*WOOD/FBGLS MARINE PRIMER
Specialty marine primer for use above the waterline. Use antifouling paint for boat bottom preparation. Quart size. Use on wood and fiberglass.
View Details
$65.99
HI-GLOSS CLEAR ACRYLIC SEALER
A clear, urethane-fortified acrylic sealer developed to provide a high-gloss premium finish to painted, stained, or bare concrete. It is durable, long-wearing, scratch-resistant, stain-resistant, and it extends paint life to interior and exterior floors and garage floors. It also protects against moisture damage and enhances the natural color of brick, slate, stone, exposed aggregate, saltillo, clay pavers, and stamped concrete. New concrete must have cured for a minimum of 30 days. Freshly painted surfaces must have cured for a minimum of 72 hours. Apply in light, even coats with a solvent resist roller (1/4" nap on smooth surfaces or 3/8" nap for rough surfaces) or pump sprayer set at a fine spray. Covers approximately 150 to 500 sq. ft. per gallon, depending on surface porosity. May add anti-skid additive to reduce slips. Dries in 2 hours and will accept vehicle traffic in 72 hours. Clean with soap and water.
View Details
$12.99
3.4OZ ANTI-SKID ADDITIVE
Create a slip-resistant diamond hard surface for maximum abrasion protection by adding to 1 gallon of Rust-Oleum Concrete & Garage Floor Paint, latex or oil floor paints. The bare-foot grade texture is easy to keep clean. The fine, uniform texture makes this additive ideal for use with Rust-Oleum decorative color chips. Will not change the color, performance or properties of the coating. Meets American with Disabilities Act (ADA) recommendations for slid-resistant surfaces. Use on garages, basements, stairs walkways, porches, patios, decks, ramps, or driveways.
View Details
